Gear Shift Position Circuit High
P0917 is an OBD-II trouble code that indicates gear shift position circuit high. This page explains what the code means, what issues may trigger it, common symptoms and where to look next.
P0917 code meaning is one of the most common OBD-II searches when a warning light appears on the dashboard.
Drivers searching for P0917 usually want to know what the code means, whether the car is safe to drive and what part may need testing first.
Likely causes
- • Open circuit or short circuit
- • Poor electrical connection
- • Wiring or connector issue
- • Component failure in the affected system
- • Intermittent signal or control fault
Symptoms
- • Check engine light illuminated
Severity
Medium
Can you keep driving?
Whether you can keep driving depends on how the vehicle is behaving. If there is rough running, loss of power, overheating or stalling, diagnose it as soon as possible.
Common fix areas
- • Check continuity, power and ground
- • Inspect for damaged wiring or corrosion
- • Scan all fault codes and freeze-frame data
- • Inspect wiring, connectors and grounds
- • Confirm repair with a retest after clearing codes
Manufacturer notes
FAQs
What does P0917 mean?
P0917 means gear shift position circuit high.
What can cause P0917?
Common causes include component failure, wiring faults, incorrect sensor readings, leaks, pressure issues or related upstream faults in the same system.
Can I keep driving with P0917?
That depends on how the car is behaving. If there is rough running, overheating, loss of power or stalling, it should be diagnosed quickly.
Does P0917 always mean I need a new part?
No. A fault code points you to a system or condition, but proper diagnosis is still needed before replacing parts.