Hydraulic Oil Temperature Sensor Range / Performance
P0938 is an OBD-II trouble code that indicates hydraulic oil temperature sensor range / performance. This page explains what the code means, what issues may trigger it, common symptoms and where to look next.
P0938 code meaning is one of the most common OBD-II searches when a warning light appears on the dashboard.
Drivers searching for P0938 usually want to know what the code means, whether the car is safe to drive and what part may need testing first.
Likely causes
- • Faulty sensor
- • Damaged sensor wiring
- • Loose or corroded connector
- • Wiring or connector issue
- • Component failure in the affected system
- • Intermittent signal or control fault
Symptoms
- • Check engine light illuminated
- • Intermittent warning light
- • Inconsistent engine performance
Severity
Low to Medium
Can you keep driving?
Whether you can keep driving depends on how the vehicle is behaving. If there is rough running, loss of power, overheating or stalling, diagnose it as soon as possible.
Common fix areas
- • Verify live data and sensor voltage
- • Inspect sensor connector and wiring
- • Scan all fault codes and freeze-frame data
- • Inspect wiring, connectors and grounds
- • Confirm repair with a retest after clearing codes
Manufacturer notes
FAQs
What does P0938 mean?
P0938 means hydraulic oil temperature sensor range / performance.
What can cause P0938?
Common causes include component failure, wiring faults, incorrect sensor readings, leaks, pressure issues or related upstream faults in the same system.
Can I keep driving with P0938?
That depends on how the car is behaving. If there is rough running, overheating, loss of power or stalling, it should be diagnosed quickly.
Does P0938 always mean I need a new part?
No. A fault code points you to a system or condition, but proper diagnosis is still needed before replacing parts.