P0341 on 2024 Hyundai I30 1.6 GDi
On a 2024 Hyundai I30 1.6 GDi petrol, OBD fault codes often relate to ignition performance, fuel trim balance, intake leaks, catalytic converter efficiency and sensor readings that affect petrol combustion.
P0341 means camshaft position sensor circuit range / performance.
Likely causes
- • Faulty sensor
- • Damaged sensor wiring
- • Loose or corroded connector
- • Open circuit or short circuit
- • Poor electrical connection
- • Timing issue
Symptoms
- • Check engine light illuminated
- • Intermittent warning light
- • Inconsistent engine performance
- • Hard starting or stalling
- • Reduced performance
Severity
Low to Medium
Can you keep driving?
Driving may be risky if the engine is running poorly, stalling or showing strong timing-related symptoms.
Fuel and engine specific themes
- • ignition and spark-related misfire issues
- • air leaks and fuel trim imbalance
- • oxygen sensor and catalyst efficiency faults
- • throttle, intake and airflow-related warnings
Common fix areas
- • Verify live data and sensor voltage
- • Inspect sensor connector and wiring
- • Check continuity, power and ground
- • Inspect for damaged wiring or corrosion
- • Scan all fault codes and freeze-frame data
- • Inspect wiring, connectors and grounds
FAQs
What does P0341 mean on a 2024 Hyundai I30 1.6 GDi petrol?
P0341 on a 2024 Hyundai I30 1.6 GDi petrol indicates camshaft position sensor circuit range / performance. The exact root cause can still vary by the powertrain layout and any related stored faults.
Can P0341 behave differently on petrol vehicles?
Yes. The same code can present differently depending on whether the vehicle is petrol, diesel, hybrid or another powertrain type, because emissions control, fuelling strategy and operating conditions are not the same.
Should I diagnose P0341 differently on this petrol model?
You should still start with the standard fault-code process, but you should also consider fuel-type-specific systems and operating behaviour when diagnosing the cause.