P0455 on 2024 Peugeot 3008 1.2 PureTech
On a 2024 Peugeot 3008 1.2 PureTech petrol, OBD fault codes often relate to ignition performance, fuel trim balance, intake leaks, catalytic converter efficiency and sensor readings that affect petrol combustion.
P0455 means system gross leak evaporative emission.
Likely causes
- • Loose or faulty fuel cap
- • EVAP hose leak
- • Purge or vent valve fault
- • Wiring or connector issue
- • Component failure in the affected system
- • Intermittent signal or control fault
Symptoms
- • Check engine light illuminated
- • Fuel smell
- • Emissions test failure
Severity
Low to Medium
Can you keep driving?
The vehicle often still drives normally, but the issue should still be repaired because it can affect emissions and trigger repeated warning lights.
Fuel and engine specific themes
- • ignition and spark-related misfire issues
- • air leaks and fuel trim imbalance
- • oxygen sensor and catalyst efficiency faults
- • throttle, intake and airflow-related warnings
Common fix areas
- • Inspect fuel cap seal
- • Smoke test the EVAP system
- • Check purge and vent valves
- • Scan all fault codes and freeze-frame data
- • Inspect wiring, connectors and grounds
- • Confirm repair with a retest after clearing codes
FAQs
What does P0455 mean on a 2024 Peugeot 3008 1.2 PureTech petrol?
P0455 on a 2024 Peugeot 3008 1.2 PureTech petrol indicates system gross leak evaporative emission. The exact root cause can still vary by the powertrain layout and any related stored faults.
Can P0455 behave differently on petrol vehicles?
Yes. The same code can present differently depending on whether the vehicle is petrol, diesel, hybrid or another powertrain type, because emissions control, fuelling strategy and operating conditions are not the same.
Should I diagnose P0455 differently on this petrol model?
You should still start with the standard fault-code process, but you should also consider fuel-type-specific systems and operating behaviour when diagnosing the cause.