P0351 on 2024 Peugeot 308 1.2 PureTech
On a 2024 Peugeot 308 1.2 PureTech petrol, OBD fault codes often relate to ignition performance, fuel trim balance, intake leaks, catalytic converter efficiency and sensor readings that affect petrol combustion.
P0351 means ignition coil a primary / secondary circuit malfunction.
Likely causes
- • Open circuit or short circuit
- • Poor electrical connection
- • Wiring or connector issue
- • Component failure in the affected system
- • Intermittent signal or control fault
Symptoms
- • Check engine light illuminated
Severity
Medium
Can you keep driving?
Whether you can keep driving depends on how the vehicle is behaving. If there is rough running, loss of power, overheating or stalling, diagnose it as soon as possible.
Fuel and engine specific themes
- • ignition and spark-related misfire issues
- • air leaks and fuel trim imbalance
- • oxygen sensor and catalyst efficiency faults
- • throttle, intake and airflow-related warnings
Common fix areas
- • Check continuity, power and ground
- • Inspect for damaged wiring or corrosion
- • Scan all fault codes and freeze-frame data
- • Inspect wiring, connectors and grounds
- • Confirm repair with a retest after clearing codes
FAQs
What does P0351 mean on a 2024 Peugeot 308 1.2 PureTech petrol?
P0351 on a 2024 Peugeot 308 1.2 PureTech petrol indicates ignition coil a primary / secondary circuit malfunction. The exact root cause can still vary by the powertrain layout and any related stored faults.
Can P0351 behave differently on petrol vehicles?
Yes. The same code can present differently depending on whether the vehicle is petrol, diesel, hybrid or another powertrain type, because emissions control, fuelling strategy and operating conditions are not the same.
Should I diagnose P0351 differently on this petrol model?
You should still start with the standard fault-code process, but you should also consider fuel-type-specific systems and operating behaviour when diagnosing the cause.