P0118 on 2024 SEAT Leon 2.0 TDI
On a 2024 SEAT Leon 2.0 TDI diesel, OBD fault codes often involve airflow control, boost pressure, EGR operation, fuel delivery, glow system behaviour and emissions hardware that is more common on diesel vehicles.
P0118 means engine coolant temperature circuit high input.
Likely causes
- • Open circuit or short circuit
- • Poor electrical connection
- • Wiring or connector issue
- • Component failure in the affected system
- • Intermittent signal or control fault
Symptoms
- • Check engine light illuminated
Severity
Medium
Can you keep driving?
Whether you can keep driving depends on how the vehicle is behaving. If there is rough running, loss of power, overheating or stalling, diagnose it as soon as possible.
Fuel and engine specific themes
- • EGR and intake contamination-related faults
- • boost pressure and airflow control issues
- • diesel fuel delivery and injector balance problems
- • diesel emissions system warnings and sensor faults
Common fix areas
- • Check continuity, power and ground
- • Inspect for damaged wiring or corrosion
- • Scan all fault codes and freeze-frame data
- • Inspect wiring, connectors and grounds
- • Confirm repair with a retest after clearing codes
FAQs
What does P0118 mean on a 2024 SEAT Leon 2.0 TDI diesel?
P0118 on a 2024 SEAT Leon 2.0 TDI diesel indicates engine coolant temperature circuit high input. The exact root cause can still vary by the powertrain layout and any related stored faults.
Can P0118 behave differently on diesel vehicles?
Yes. The same code can present differently depending on whether the vehicle is petrol, diesel, hybrid or another powertrain type, because emissions control, fuelling strategy and operating conditions are not the same.
Should I diagnose P0118 differently on this diesel model?
You should still start with the standard fault-code process, but you should also consider fuel-type-specific systems and operating behaviour when diagnosing the cause.